性做久久久久久坡多野结衣-性做久久久久久久久浪潮-性欲影院-性影院-国产精品线路一线路二-国产精品兄妹在线观看麻豆

 作者： Hung-Hua Sheu^a, Shun-Yi Jian^a, Tzu-Te Lin^a, Ya-Wei Lee^b,

^a Department of Chemical and Materials Engineering, Chung Cheng Institute Technology, National Defense University, Da-Xi, Tao-Yuan 335, Taiwan

^b Department of Mechanical and Aerospace Engineering, Chung Cheng Institute of Technology, National Defense University, Da-Xi, Tao-Yuan 335, Taiwan

 

摘要：The rotational speeds of an electromagnetic stirrer was varied to control the growth of particle size of neodymium-doped yttrium aluminum garnet (Nd:YAG) precursors into calcined powder. First, the Nd:YAG precursors were prepared using a chemical co-precipitation technique with different electromagnetic stirrer's rotational speeds, and then the precursors were calcined at different temperatures to obtain Nd:YAG nanoparticles. The precursors obtained from different co-precipitation conditions were heated from room temperature to 1000 °C, and then the phase evolution was analyzed through differential scanning calorimetry. The formation of YAG phase at different calcination temperatures was analyzed through X-ray diffraction. The size of Nd:YAG nanoparticles prepared at different electromagnetic stirrer's rotational speeds were analyzed using by particle size analyzer and scanning electron microscope. The experimental results indicated that the size of Nd:YAG nanoparticles could be controlled at approximay 300 nm when the Nd:YAG precursors were prepared from an electromagnetic stirrer rotational speed at 400 rpm and then calcined at 1300 °C. The obtained smaller particles size can be attributed to a homogeneous flow field within the mixing solution.