性做久久久久久坡多野结衣-性做久久久久久久久浪潮-性欲影院-性影院-国产精品线路一线路二-国产精品兄妹在线观看麻豆

UniGo™微流控注射泵是一種能控制流量的單流道壓力泵，在微流控研究中有著廣泛的應用。本泵主要依靠注入空氣來產生壓力，推動注射器單向前進。UniGo™泵配有即插即用的流體傳感器來實現主動反饋，增加了流體控制能力。自帶的控制軟件可同時操縱四臺UniGo™泵，并且可對各個泵進行獨立編程。UniGo™泵與ExiGo™泵連用可使微流控實驗設計更加靈活。
系統亮點
兩種運行模式：手動流量

UniGo™微流控注射泵（UniGo™ Microfluidic Pump）

 

備有現貨

UniGo™微流控注射泵是一種能控制流量的單流道壓力泵，在微流控研究中有著廣泛的應用

請致電索取中文介紹和文獻

The UniGo™ Microfluidic Pump is a precision, microfluidic, single-channel pressure pump for a variety of microfluidic applications, where accurate and stable flow rate delivery is required. The pressure pump component is based on controlled air injection. The UniGo™ pump requires a plug-and-play flow sensor for active feedback and increased flow control. SmartFlo Application executed on the iPad mini or LabView based interface communicates with up to 4 UniGo™ Microfluidic Pumps racked together allowing simultaneous control and independent programming of each pump’s flow profile. Uniquely, the UniGo™ may be docked together with the ExiGo™ microfluidic syringe pump combining the best features of both UniGo™ and ExiGo™ in one microfluidic set-up. Note: it is compulsory to purchase a flow sensor with the UniGo pump.

 

 

Features:

• 2 modes of pumping: manual flow rate set or preprogrammed flow rate operation.
• Preprogrammed mode includes: Constant, Ramp, Step, Sine functions.
• Wi-Fi communication with iPad mini software.
• USB communication with LabView based PC control software.
• Tactile power switch.
• LEDs for power / status information.
• Side port connections to dock up to 4 pumps (combination of UniGo and ExiGo) into one setup.
• Volumetric flow rates: 1 µL/min – 1 mL/min.

Consumables & Accessories

Biochips 

Click to view biochip consumables compatible with the UniGo pump.

Flow Sensors

Click to view flow sensors compatible with the UniGo pump.

Performance Specifications

Volumetric Flow Rates	1 µL/min - 1mL/min
Flow Direction	Unidirectional (Push)
Pulse-free flow rate for microfluidic applications*	1 µL/min – 80 µL/min ± 120 nL/min with 80.0 µL flow sensor (FS-80.0) 10 µL/min – 1 mL/min ± 2 µL/min with 1.0 mL/min flow sensor (FS-1000)
Working Pressure	30 psi – 2 bars maximum
Compressor Options	Internal or external
Software Control	SmartFlo App running on iPad mini LabVIEW based PC software
Dimensions	225mm x 69mm x 122mm (L x W x H)
Weight	Approx. 1.3kg
Power Requirements	110 / 220V - 50 / 60Hz - 60W

*Measured with Flow Sensor and active PID feedback

 Flow Sensor (compulsory accessory)

Operation	Plug and play connection to the UniGo Microfluidic pump
Features	Allows monitoring of UniGo pump flow rate and active PID (proportional, integral, differential) feedback of pump flow rate
Dead volume	1 - 25 µL depending on Flow Sensor
Measured flow rate changes	See Technical Note on Flow Sensors
Max pressure	30 psi – 2 bars maximum
Dimensions / Weight	60mm (L) x 51mm (W) x 21mm (H) / < 0.1 kg
Power Requirements	Via cable to UniGo Microfluidic Pump