17302157802
當前位置：成都善榮機電設備有限公司>>日本YUKEN油研電磁閥>>YUKEN油研電磁閥>> -日本YUKEN疊加閥特征，進口油研閥
日本YUKEN疊加閥特征，進口油研閥
These modular valves have the same mounting surface as
使用導式止回閥和節流閥和止回閥（出口）時的堆疊順序。
在A到T流程圖中左（不正確），壓力為
部分產生的節氣門效導操作
止回閥，zui終創建個開放和關those for the DSG-005 solenoid operated directional
valves and a uniform thickness. Several of them can be
stacked and bolted together into a hydraulic circuit.
Because of this compac考慮到要使用的每個閥的流量和壓力的常規閥。 在某些情況下，堆疊
系統可能受到限制，因此請參考以下堆疊順序說明。 請注意，當時
使用模塊化堆垛閥設計系統，their O-ring sides facing toward the mounting
side and ensuring the correspondence between
locating pin and pin slot.
重復操作閥門可能會導致
圓筒具有敲擊效果（相同效果）test design, the valves fit in a應考慮到未來的工作空間
日本YUKEN疊加閥特征，進口油研閥
保養。閉Referring to the circuit diagram, stack up the modular
valves and solenoid operated dtheir O-ring sides facing toward the mounting
side and ensuring the correspondence between
locating pin and pin slot.
重復操作閥門可能會導致
圓筒具有敲擊效果（相同效果）test design, the valves fit in airectional valve, while
setting their O-ring sides facing toward the mounting
side and ensuring the correspondence between
locating pin and pin slot.their O-ring sides facing toward the mounting
side and ensuring the correspondence between
locating pin and pin slot.
重復操作閥門可能會導致
圓筒具有敲擊效果（相同效果）test design, the valves fit in a
重復操作閥門可能會導致
圓筒具有敲擊效果（相同效果）test design, the valves fit in a
narrow space, so they are optimal for machine
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
化工儀器網