首頁 >> 供求商機
概述
The Transducer Techniques RTS Series torque sensors were designed to fill the need for accurate torque measurements below 62.5 in.lbs. without giving up stiffness or sensitivity to forces from other directions.
RTS扭力傳感器專為精確測量62.5in-lbs以下量程而設計，并且不會因為其他方向的力而犧牲抗擾性和靈敏度。
They are manufactured from sensor quality aluminum and anodized for long term durability. Bonded foil strain gages and materials of the highest quality are installed assuring high reliability. The four bolt hole pattern with the use of our O.D. or I.D. pilots on either end allows simple adaptation to any application.
Transducer RTS材質為陽極電鍍鋁，并內置質量的應變計，為傳感器的耐久度提供了保障。4個螺紋孔和兩端的內外徑孔設計，能保證傳感器適應各種安裝應用。
詳情請聯系我們
額定輸出 | 1.5 mV/V nominal |
非線性 | 0.1% of R.O. |
磁滯 | 0.1% of R.O. |
不可重復性 | 0.05% of R.O. |
零點平衡 | 1.0% of R.O. |
補償溫度范圍 | 60°to 160°F (16℃-71℃) |
安全溫度范圍 | -65°to 200°F (19℃- 93℃) |
靈敏度溫漂 | 0.005% of Load/°F |
零點溫漂 | 0.005% of R.O./°F |
終端電阻 | 350 ohms nominal |
激勵電壓 | 10 VDC |
安全載荷 | 150% of R.O. |
訂貨型號
型號 | 量程 （in-oz） | 量程 (in-lb) | 抗扭剛度 (in-oz) | 懸臂力矩 (WxS in-oz) | 抗剪強度 (W oz) | 推力 (P oz) |
RTS-5 | 5 | 0.312 | 725 | 60 | 40 | 280 |
RTS-10 | 10 | 0.625 | 725 | 60 | 40 | 280 |
RTS-25 | 25 | 1.562 | 1875 | 60 | 60 | 385 |
RTS-50 | 50 | 3.125 | 3650 | 100 | 100 | 560 |
RTS-100 | 100 | 6.250 | 7250 | 150 | 150 | 768 |
RTS-200 | 200 | 12.500 | 14525 | 200 | 200 | 1360 |
RTS-500 | 500 | 31.250 | 36125 | 250 | 250 | 2400 |
RTS-1K | 1000 | 62.500 | 72350 | 480 | 480 | 3600 |
P 推力 S 離檢測設備重心距離
W 檢測設備重量 W x S 懸臂力矩
選配
配件型號 | 配件名稱 |
CAL-TEDS | 即插即用式連接頭 |
AFS-RTSF | 插座轉換器（母） |
AFS-RTSM | 插座轉換器（公） |
相關型號
TRS
STS
TRT
SWS
3