目錄:深圳市漢斯福特科技有限公司>>張力計>> DX2-EDM 線割張力儀
張力儀是測量絲網受到拉力作用時其內部與固定絲網接觸體之間的相互牽引力大小的儀器。張力儀有機械式和電子式兩種，測量張力的單位用牛頓/厘米表示。張力也可以用相對數值來表示。厘米張力儀就是用相對數值表示張力的一種，是通過張力儀自身重量使絲網下沉的深度的數值(毫米)來計算，張力數值可從指示盤上直接得到，或者從控制盤上間接得到。張力儀有手工操作和機械操作兩種。張力儀是檢驗絲網印版質量的重要的檢測儀器。為保證得到制版要求的張力，在繃網過程中或繃網后都要使用張力儀測量。
德國施密特（Hans Schmidt & Co GmbH）專注于卷材張力檢測和張力控制有超過60年歷史，是大張力測量儀表生產商。旗下產品有張力計Schmidt EDM，一款通用型張力儀，主要用在線切割加工機器上。
The Schmidt DX2-EDM Hand-Held Mechanical Tension Meters are designed to measure the tension on all current wire EDM machines with using a wire diameter of approx. 0.25 mm. These models are used throughout the world and considered the standard tension meter for the industry.
The DX2-EDM correct erosion wire tension reduces wire oscillation and guarantees a pinpoint accuracy of your machines. Always check the tension in calibration mode on the moving wire. Make sure the generator is switched off for the tension check.
Easy-to-read analog scale
Simple handling
Special versions for specific EDM machines are available
Measuring range 2000 g, 3000 g or 4000 g
Calibration in cN is available
Accuracy | ± 1% Full scale or ± 1 scale graduation mark |
Rollers | Material : Hardcoated aluminum Diameter: 12 mm |
Scale Diameter | 41 mm |
Temperature Range | 8 - 45 °C |
Humidity Maximum | 85% RH |
Housing Material | Aluminum die casting |
Dimensions | 215 mm x 90 mm x 44 mm (L x W x H) |
Weight | (net/gross) approx. 500 g / 1000 g |
Model | Range | Roller distance | Material |
Model | Range | Roller distance | Material |
DX2-2000-EDM | 50 - 2000 cN | 75 | No |
DX2-2000-EDM-G | 50 - 2000 g | 75 | No |
DX2-3000-EDM | 100 - 3000 cN | 75 | No |
DX2-3000-EDM-G | 100 - 3000 g | 75 | No |
DX2-4000-EDM | 200 - 4000 cN | 100 | Yes |
DX2-4000-EDM-G | 200 - 4000 g | 100 | Yes |
相關型號
DX2
DTMB
DTMX
ZED
ZEF
ETMB
3
化工儀器網