化工儀器網
產品簡介
品牌：Anritsu
型號：68369B（66169,68169）
信號源:10MHz~40GHz
型號：68369B（66169,68169）
信號源:10MHz~40GHz
詳細介紹
| Frequency (GHz) Output Power輸出功率頻率(同) | Output Power w/Step Attenuator輸出功率衰減w /步驟 |
| 0.01 – 2.0 GHz+13.0 dBm0.01 - 2.0兆赫+ 13.0 | +11.0 dBm+ 11.0 |
| 2.0 – 20.0 GHz+9.0 dBm2.0 - 20.0兆赫+ 9.0 | +7.0 dBm+ 7.0 |
| 20.0 – 40.0 GHz+6.0 dBm20.0 - 40.0兆赫+ 6.0 | +3.0 dBm+ 3.0 |
| CW Mode連續波模式 | ||
| Output輸出 | Twenty independent, presettable CW frequencies (F0 ? F9 and M0 ? M9)二十獨立,presettable連續波頻率(F0?F9和M0?M9) | |
| Accuracy精度 | Same as internal or external 10 MHz time base一樣的內部或外部10兆赫時間基地 | |
| Internal Time Base Stability內部時間基準的穩定性 | With Aging:隨著年齡的增長。 | <2 x 10 -8 /day (<5 x 10 ?10 /day with Option 16)< 2×10 8 /天(< 5×10?/ 10天選項16) |
| With Temperature:溫度: | <2 x 10 -8 /C over 0C to 55C (<2 x 10 -10 /C with Option 16)< 2×10 8 0 C / C在55 C(< 2×10 -10 / C選項16) | |
| Resolution決議 | 1 kHz (0.1 Hz with Option 11)1千赫(0.1赫茲選項11) | |
| External 10 MHz Reference Input10兆赫參考外部輸入 | Accepts external 10 MHz 100 Hz, 0 to +10 dBm time base signal. 接受外部10赫茲100赫茲,0至+ 10 dBm時間基準的信號。Automatically disconnects the internal high-stability time-base option, if installed. 自動切斷內部高穩定性time-base選項如果安裝。BNC, rear panel, 50 Ohmn impedanceBNC,面板,50 Ohmn阻抗 | |
| 10 MHz Reference Output10兆赫參考輸出 | 0.5 Vp-p into 50 Ohmn, AC coupled. 0.5 Vp-p到50個Ohmn、交流耦合。Rear panel BNC; 50 Ohmn impedance面板BNC;50 Ohmn阻抗 | |
| Switching Time (typical maximum)切換時間(典型的zui大) | <40 ms to be within 1 kHz of final frequency在< 40微軟赫茲的頻率的zui后 | |
| Analog Sweep Mode掃模式模擬 | ||
| Sweep Width掃寬度 | Independently selected from 1 MHz to full range continuous sweep精選,獨立1兆赫*持續打掃一下 | |
| Accuracy精度 | The lessor of: 30 MHz or (2 MHz + 0.25% of sweep width) for sweep speeds of ≤50 MHz/ms.出租人:30兆赫或(2兆赫+ 0.25%的掃寬度)≤50兆赫茲的掃描速度/ ms。 | |
| Sweep Time Range掃描時間范圍 | 30 ms to 99 seconds30微軟99秒 | |
| Phase-Locked Step Sweep Mode鎖相一步掃模式 | ||
| Sweep Width掃寬度 | Independently selected, 1 kHz (0.1 Hz with Option 11) to full range. 自主選擇,1千赫(0.1赫茲選項11)到全范圍。Every frequency step in sweep range is phase-locked每一個頻率掃描范圍是鎖一步 | |
| Accuracy精度 | Same as internal or external 10 MHz time base一樣的內部或外部10兆赫時間基地 | |
| Resolution (Minimum Step Size)分辨率(zui低臺階尺寸) | 1 kHz (0.1 Hz with Option 11)1千赫(0.1赫茲選項11) | |
| Steps步驟 | User-selectable number of steps or the step size用戶可選擇的數目的步驟或步長的大小 | |
| Number of Steps數目的步驟 | Variable from 1 to 10,000變量。從1至10000 | |
| Step Size步長的大小 | 1 kHz (0.1 Hz with Option 11) to the full frequency range of the instrument. 1千赫(0.1赫茲選項11)全頻率范圍的樂器。(If the step size does not divide into the selected frequency range, the last step is truncated.)(如果步長的大小不分為選定的頻率范圍,zui后一步是被刪除的。) | |
| Dwell Time Per Step每一步停留的時間 | Variable from 1 ms to 99 seconds變量從1到99秒女士 | |
| Switching Time (typical maximum)切換時間(典型的zui大) | <15 ms + 1 ms/GHz step size or <40 ms, whichever is less小于15 + 1 ms / ms阻抗或< 40步長的大小,無論哪個女士較少 | |
| Alternate Sweep Mode交替掃描模式 | ||
| Sweeps alternay in analog or step sweep between any two sweep ranges. 用模擬或一步清潔工打掃之間的任何兩個掃描范圍。Each sweep range may be associated with a different power level每一個掃描范圍可能與一個不同的功率水平 | ||
| Manual Sweep Mode手動掃描模式 | ||
| Provides stepped, phase-locked adjustment of frequency between sweep limits. 提供走,掃頻鎖相調整之間的極限。User-selectable number of steps or step size. 用戶可選擇的數目的步驟或步驟的尺寸。360B VNA SOURCE LOCK MODE360 B VNA源鎖定模式 | ||
| Under control of the ANRITSU 360B Vector Network Analyzer, the synthesized signal generator is phase-locked at a typical <8.5 ms/step sweep speed. 控制下的矢量網絡分析儀,特制下360 B,合成信號發生器是一個典型鎖< 8.5 ms /步驟掃速度。Frequency resolution is limited to 100 kHz頻率分辨率限制在100千赫 | ||