您好, 歡迎來到化工儀器網
產品簡介
詳細介紹
·組合步入式恒溫濕室為業界提供大型零件、半成品、成品的溫濕度環境測試。
·如：計算機終端機、汽車零組件。
Combined wald-in constant temperature humidity chamber provides temperature and humidity environmental tests for large parts,semi-finishend products,and finished products,e.g. computer terminals,auto parts.
組合步入式恒溫恒濕室為業界提供大型零件、半成品、成品的溫濕度換將測試，如：計算機終端機、汽車零組件。恒溫恒濕主要由控制面板、配電盤、保溫庫板、送風機、加熱器、加濕器、冷凍機組合而成，主要規格可區分為6種標準室內尺寸及24種不同條件測試規范。
The walk in temperature and humidity chambers are used for test large components,assemblies and finished products in various industries,e.g. monitor and autos productions.They are constru-ctedin modules of control panel electrical control system,partition,air circulation and heating/cooling unit.The chambers are specialized in 6 standard sizes and 24 standard conditioning modules.
·利用多翼式送風機強力送風循環，避免任何死角，使室內溫濕分布均勻。
·完整的安全保護裝置。
·假如異常狀況發生時，控制熒幕上即自動顯示故障狀態，切斷電源開關，并提出故障排除方法。
·The sirocco fan provides greater air flow rate to minimize any dead zone in the chamber to ensure the uniformity of temperature and humidity.
·Well-prepared safety devices
·If the safety devices of chamber activate,Monitor will display the trouble shooting details and sugg-ested solution.
·GB10586-89濕熱試驗箱技術條件 ·GB/T2423.4-1993交變濕熱試驗方法
·GB10589-89低溫試驗箱技術條件 ·GJB150.3-86高溫試驗
·GB10592-89高低溫試驗箱技術條件 ·GJB150.3-86低溫試驗
·GBI1158高溫試驗箱技術條件 ·GJB150.7-86太陽輻射試驗
·GB2423.1-1989低溫試驗方法 ·GJB150.8-86淋雨試驗
·GB2423.2-1989高溫試驗方法 ·GJB159.9-89濕熱試驗
·GB/T2423.3-1993恒定濕熱試驗方法 ·GJB150.10-86霉菌試驗