您好, 歡迎來到化工儀器網
產品簡介
LH72,magnescale磁柵尺,SONY數顯表,sony magnescale數顯表。專業供應： 手機:1373.264.8958 /
詳細介紹
LH72,magnescale磁柵尺,SONY數顯表,sony magnescale數顯表
magnescale磁柵尺
sony magnescale
magnescale
專業供應： 手機:1373.264.8958 /
magnescale SONY位移傳感器、SONY檢測器、SONY變送器、SONY探規、SONY數顯表、SONY電纜、SONY磁柵尺、SONY 磁尺、SONY讀數頭、SONY光學尺、SONY光柵尺，SONY電子尺、SONY反饋尺、SONY高度規、SONY數字規等系列產品
LG10系列：LG10-1、LG10-2、LG10-3
LH71A:LH71-1/LH71-2/LH71-3
以緊湊尺寸多樣的場青年靈活對應車床用高性能顯示單元。
車床的功能
zui小表示量轉換
區間誤差校正
保存數據
復位/預置
測量原點檢測單位
程序功能
縮放
車床式樣(工具)坐標/加機能
電源另售AC適配器(PSC -21)是很必要的。
專業供應： 手機:1373.264.8958 /
LH70/71
| LH70/71 Display Counter Pricing | ||
| Model | Description | MSRP |
| LH70-1 | Single Axis LH70 Display | $600.00 |
| LH70-2 | Two Axis LH70 Display | $710.00 |
| LH70-3 | Three Axis LH70 Display | $815.00 |
| LH71-1 | Single Axis LH71 Display | $700.00 |
| LH71-2 | Two Axis LH71 Display | $810.00 |
| LH71-3 | Three Axis LH71 Display | $915.00 |
Display Specifications
| Model Name | LH70-1 | LH70-2 | LH70-3 | LH71-1 | LH71-2 | LH71-3 |
| Item | ||||||
| Display Axes | 1 | 2 | 3 | 1 | 2 | 3 |
| Display | 7 digits and "-" display. Amber LEDs | |||||
| Connectable measuring Units | SJ300 Series (Direct). GB-A/SR128, PL20B, DG-B Series (Adaptors Available) | |||||
| Scale Input resolution | Basic: 0.1µm, 0.5µm, 5µm, 10µm, 1s, 10s, 1min, 10min Expanded: 100µm, 50µm, 25µm, 20µm, 2µm, 0.05µm | |||||
| Display resolution* | Basic: The above and their diamter displays 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", and their diameter displays Expanded: The above and their diamter displays 0.000002", 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", 0.001", 0.002", 0.005 and their diameter displays | |||||
| Input signal | A/B Quadrature signal, Z signal (Equivalent with RS-422) | |||||
| Mh. phase input difference | 100ns | |||||
| Alarm display | Scale disconnected / Excess speed / Data Overflow / Power failure / Error in stored data | |||||
| Preset/Recall function | 3 items | |||||
| Mulit datum point | 10 | 150 | ||||
| Tool offsets (for Lathe) | - | 12 | - | 99 | ||
| Axis Summing | - | Same as LH71 | - | Sum of 2 axes | ||
| Display Hold | - | Same as LH71 | - | The displayed value can be held and the datum entered | ||
| Ref. point function | The absolute zero point can be detected and the datum point can be re-established. (Requires a scale with a reference point) | |||||
| Bolt hole circle | - | Same as LH71 | - | Input diamter, start angle, stop angle, No. of holes | ||
| Radius cutting function | - | Same as LH71 | - | Input radius, Tool diameter, feed angle | ||
| Data storage | Stores the value dispalyed before power loss and the last preset datum | |||||
| Max. linear error compensation | ±600µm/m | |||||
Counter Specifications
| Model Name | LH70-1 | LH70-2 | LH70-3 | LH71-1 | LH71-2 | LH71-3 |
| Item | ||||||
| Segmented Error Compensation | - | 32 sectors max. (Requires a scale with a reference point) | ||||
| Line Hole Function | - | Input angle, number of holes and patch of the holes | ||||
| Scaling Function | - | 0.100000 to 9.999999 | ||||
| Program Function | - | Coordinates of datum points can be programmed via: 1. Manual programming by the keypad 2. Automatic programming while machining 3. Mirro image function when the program is executed. 4. Canned cycles (Bolt hole, Line hole, ARC) can be inserted into the program | ||||
| Angle Display Function | - | Angle value displayed when using the Digirule scale and entering the diameter and signal resolution. | ||||
| Power Save Function | LED display turns off after a user-definable period of time | |||||
| Navigation Function | Status and Navigation LED’s | |||||
| Power Supply | 12VDC 100 to 240VAC±10% (When using AC adaptor) | |||||
| Power Consumtion | Max. 25VA (connected at AC power supply) | |||||
| Operating Temperature | 0 to 40°C (no condensation) | |||||
| Storage Temperature | -20 to 60°C (no condensation) | |||||
| Mass | Approx 1.5kg | |||||
:86-,手機:/
專業供應： 手機:1373.264.8958 /