產品分類 品牌分類

產品簡介

LH71-3,magnescale磁柵尺,SONY數顯表,sony magnescale數顯表。專業供應：手機:1373.264.8958 /

詳細介紹

LH71-3,magnescale磁柵尺,SONY數顯表,sony magnescale數顯表

magnescale磁柵尺

sony magnescale

magnescale

專業供應：手機:1373.264.8958 /

銑床和車床(LH71A - 3只)的功能

zui小表示量轉換

區間誤差校正

保存數據

復位/預置

測量原點檢測單位

程序功能

多基準點

縮放

銑床式樣(螺栓大廳小組/簡易R加工/線)大廳

車床式樣(工具)坐標/加機能

電源另售AC適配器(PSC -21)是很必要的。

LH70/71

LH70/71 Display Counter Pricing
Model	Description	MSRP
LH70-1	Single Axis LH70 Display	$600.00
LH70-2	Two Axis LH70 Display	$710.00
LH70-3	Three Axis LH70 Display	$815.00
LH71-1	Single Axis LH71 Display	$700.00
LH71-2	Two Axis LH71 Display	$810.00
LH71-3	Three Axis LH71 Display	$915.00

Display Specifications

Model Name	LH70-1	LH70-2	LH70-3	LH71-1	LH71-2	LH71-3
Item
Display Axes	1	2	3	1	2	3
Display	7 digits and "-" display. Amber LEDs
Connectable measuring Units	SJ300 Series (Direct). GB-A/SR128, PL20B, DG-B Series (Adaptors Available)
Scale Input resolution	Basic: 0.1µm, 0.5µm, 5µm, 10µm, 1s, 10s, 1min, 10min Expanded: 100µm, 50µm, 25µm, 20µm, 2µm, 0.05µm
Display resolution*	Basic: The above and their diamter displays 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", and their diameter displays Expanded: The above and their diamter displays 0.000002", 0.000005", 0.00001", 0.00002", 0.00005", 0.0001", 0.0002", 0.0005", 0.001", 0.002", 0.005 and their diameter displays
Input signal	A/B Quadrature signal, Z signal (Equivalent with RS-422)
Mh. phase input difference	100ns
Alarm display	Scale disconnected / Excess speed / Data Overflow / Power failure / Error in stored data
Preset/Recall function	3 items
Mulit datum point	10			150
Tool offsets (for Lathe)	-		12	-		99
Axis Summing	-		Same as LH71	-		Sum of 2 axes
Display Hold	-		Same as LH71	-		The displayed value can be held and the datum entered
Ref. point function	The absolute zero point can be detected and the datum point can be re-established. (Requires a scale with a reference point)
Bolt hole circle	-	Same as LH71		-	Input diamter, start angle, stop angle, No. of holes
Radius cutting function	-	Same as LH71		-	Input radius, Tool diameter, feed angle
Data storage	Stores the value dispalyed before power loss and the last preset datum
Max. linear error compensation	±600µm/m

Counter Specifications

Model Name	LH70-1	LH70-2	LH70-3	LH71-1	LH71-2	LH71-3
Item
Segmented Error Compensation	-			32 sectors max. (Requires a scale with a reference point)
Line Hole Function	-			Input angle, number of holes and patch of the holes
Scaling Function	-			0.100000 to 9.999999
Program Function	-			Coordinates of datum points can be programmed via: 1. Manual programming by the keypad 2. Automatic programming while machining 3. Mirro image function when the program is executed. 4. Canned cycles (Bolt hole, Line hole, ARC) can be inserted into the program
Angle Display Function	-			Angle value displayed when using the Digirule scale and entering the diameter and signal resolution.
Power Save Function	LED display turns off after a user-definable period of time
Navigation Function	Status and Navigation LED’s
Power Supply	12VDC 100 to 240VAC±10% (When using AC adaptor)
Power Consumtion	Max. 25VA (connected at AC power supply)
Operating Temperature	0 to 40°C (no condensation)
Storage Temperature	-20 to 60°C (no condensation)
Mass	Approx 1.5kg