現貨 110-19  聚酰亞胺導電膠

說明：110-19是一種單組分、銀填充、導電聚酰亞胺粘合劑，適用于

通過沖壓、絲網印刷、浸漬和注射器分配應用。這個產品是為裝配而設計的

電氣和電子部件。固化計劃允許快速處理和由此產生的粘結展示

優異的熱穩定性和高溫附著力。

典型固化特性：

稠度光滑膏

填充銀

銀含量，固化>81

玻璃變壓器。臨時雇員。（攝氏度）>250

體積電阻率（Ω-cm）0.0001

可焊性編號

水解穩定性優異

有效溫度范圍（℃）-55至+270

熱穩定性（攝氏度）達到325

T-抗剪強度（psi）>1250

熱導率（w/mk）8.13

建議的處理和固化：110-19已準備好供應使用。在表面涂上粘合劑

用手工和/或自動方法粘合和裝配。施加輕微壓力以確保表面良好配合

以及菲力的形成。在170°C至180°C下固化1小時后，大多數應用的性能佳。良好

通過在120°C至150°C的溫度下固化，可在多種基底上獲得性能。

一般在150℃下固化30分鐘。建議終用戶通過實驗確定溫度和時間

適合個人應用。

貯存期：在-5°C下保存1年。

安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間

接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。

現貨 110-19  聚酰亞胺導電膠

DESCRIPTION: 110-19 is a single component, silver filled, electrically conductive polyimide adhesive suitable for
application by stamping, screen printing, dipping and syringe dispensing. This product is designed for assembling
electrical and electronic components. The cure schedule allows for rapid processing and the resulting bond exhibits
excellent thermal stability and adhesion at high temperatures.
TYPICAL CURED PROPERTIES:

Consistency Smooth Paste
 Filler Silver
 Percent Silver, cured > 81
 Glass Trans. Temp. (°C) > 250
 Volume Resistivity (Ω-cm) 0.0001
 Solderable No
 Hydrolytic Stability Excellent
 Useful Temperature Range (°C) -55 to +270
 Thermal Stability (°C) Good to 325
 T-Shear Strength (psi) >1250
Thermal Conductivity (W/mK) 8.13
SUGGESTED HANDLING & CURING: 110-19 is ready to use as supplied. Apply adhesive to surface to be
bonded by hand and/or automatic method and assemble. Apply slight pressure to assure good mating of surfaces
and formation of filet. Best properties for most applications result when cured for l hour at 170°C to 180°C. Good
properties are obtained on a variety of substrates by curing at temperatures ranging from 120°C to 150°C. Most
popular cure is 30 minutes at 150°C. End user is advised to experimentally determine temperature and time best
suited for individual applications.
STORAGE: Shelf Life: 1 year at -5°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.