您好, 歡迎來到化工儀器網
產品簡介
詳細介紹
SPECS
| ITEM | Self-Priming Turbine Pump |
|---|---|
| TYPE | Sealless Magnetic Drive, Close Coupled |
| HP | 2 |
| PHASE | 3 |
| VOLTAGE | 208-230/460 |
| AMPS | 2.67 |
| HZ | 60 |
| INLET （IN.） | 1 |
| OUTLET （IN.） | 1 |
| MOTOR ENCLOSURE | TEFC |
| NEMA/IEC FRAME | 56C |
| MOTOR RPM | 3600 |
| MOTOR TYPE | TEFC |
| SERVICE FACTOR | 1.25 |
| WETTED MATERIALS | Polypropylene |
| IMPELLER MATERIAL | Polypropylene |
| HOUSING MATERIAL | Polypropylene |
| VOLUTE MATERIAL | Polypropylene |
| SCREW MATERIAL | Stainless Steel |
| MAX. LIQUID TEMP. （F） | 140 |
| GPM @ 0 PSI | 20 |
| GPM @ 10 PSI | 17 |
| GPM @ 20 PSI | 15 |
| GPM @ 30 PSI | 12 |
| GPM @ 40 PSI | 9 |
| MAX. PRESSURE （PSI） | 45 |
| BEST EFFICIENCY GPM @ HEAD （FT.） | 14 GPM @ 22 PSI |
| BEST EFFICIENCY RANGE GPM @ HEAD （FT.） | 8-18 GPM @ 45-10 PSI |
| MAX. SPECIFIC GRAVITY | 1.2 |
| MAX. CASE PRESSURE （PSI） | 75 |
| MAX. FLUID VISCOSITY | 50 SSU |
| IMPELLER TYPE | Regenerative Turbine |
| BEARING TYPE | Sealed Ball Bearing （Motor Bearing） |
| DUTY | Continuous |
| MAX. DIA. SOLIDS （IN.） | 150 Microns |
| AGENCY COMPLIANCE | UL, CSA, CE on Motor Only |
| APPLICATION | CIP Systems, Acid and Caustic Transfer, ECD Acid Spray Systems, Low Micron Filtration, Electroplating & Precious Metals, Carbon and Resin Treatment, High Purity Liquids, Freon Systems, Radar Cooling and Truck PTO Bulk Transfer |
| LENGTH （IN.） | 19 |
| HEIGHT （IN.） | 10 |
| WIDTH （IN.） | 9-3/32 |
| CONSTRUCTION | Solid Machined Glass-Free Polypropylene, Ceramic Shaft, PTFE-C Sleeve Bearings, EPDM O-Ring, Dual Neodymium Sealless Magnetic Coupling |
| WEIGHT | 55.750000 |
| SKUS | 4KTZ2 |
DESCRIPTION
- Sealless Magnetic Drive Turbine Pumps
- Low-flow, high-head performance delivers acids and caustics through piping systems with varying head conditions. High-pressure capacities help extend filter media life with pulse-free flow in ultrapure filtration systems. Zero-emission, sealless magnetic drive system helps meet EPA regulations, while avoiding mechanical seal and power frame maintenance issues. Polypropylene housing, volute, and impeller. Sealed motor ball bearings provide continuous duty service. Pumps are suitable for injecting cleaning agents in high head for food and beverage processes, including spray systems, low micron, and ultrapure filtration systems.
- Max. viscosity: 50 SSU
- Max. specific gravity: 1.2
- Self priming
- TEFC motor enclosures
- Mount on 56C frames
Self-Priming Turbine Pump, Sealless Magnetic Drive, Close Coupled, 2 HP, 3 Phase, Voltage 208-230/460, 2.67 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 45 PSI, Length 19 In., Height 10 In., Width 9 3/32 In.
如果您對本品感興趣請與我公司
北京東方安諾生化科技有限公司
： -8007
： www.annovatech.com
： caoye513