1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time
unless otherwise stated.
2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output |
| | Input Specification | |
| | Characteristics | Conditions | |
| | Voltage Range | AC IN | 90 ~ 264 VAC
| |
| | DC IN | 120 ~ 370 VDC
| |
| | Frequency | 47 ~ 440 Hz
| |
| | | | | | |
| | Output Specification | |
| | Characteristics | Conditions | |
| | Output Power | 5 Watt （max.） | |
| | Voltage Accuracy
（Full Load and Nominal Vin） | Single: | ±2% | |
| | Dual: | ±2% | |
| | | | |
| | Minimum Load （at Full Load） | to 4% | |
| | Line Regulation
（LL to HL at Full Load） | Single: | ±0.3% | （typ.） | |
| | Dual: | ±0.3% | |
| | | | |
| | Load Regulation
（5% to at Full Load）
| Single: | ±0.5% | （typ.） | |
| | Dual: | ±0.5% | |
| | | | |
| | Ripple （20MHz bandwidth） | <0.2% Vout+40mV | （max.） | |
| | | |
| | Noise （20MHz bandwidth） | <0.5% Vout+50mV | （max.） | |
| | | |
| | Temperature Coefficient | ±0.02% / °C （max.） | |
| | Short Circuit Protection | Hiccup mode, indefinite （automatic recovery） | |
| | | | | | |
| | General Specification | |
| | Characteristics | Conditions | |
| | Switching Frequency | 100K Hz （typ.） | |
| | Isolation Voltage （Input to Output） | 3000 VAC （min.） | |
| | Operating Temperature | -25 °C to +70°C （with derating） | |
| | Storage Temperature | -40°C to +85°C | |
| | Humidity | 95% RH （max.） | |
| | Cooling | Free-air convection | |
| | | | | | |
| | Physical Specification | |
| | Characteristics | Conditions | |
| | Dimension （Tolerance ±0.5） | 55.0 x 45.0 x 20.5 mm | |
| | 2.17 x 1.77 x 0.81 inches | |
| | Weight | 80 g | |
| | Case Material | Plastic resin with Fiberglass （flammability to UL 94V-0） | |
| | | |
16
