力源閥控式鉛酸蓄電池6-FM-7 12V7AH航海

力源閥控式鉛酸蓄電池6-FM-7 12V7AH航海

 northern China's largest coastal industrial cities, tianjin jinnan economic development zone, is a collection of scientific research, production, circulation, valve control type sealed lead-acid battery of professional manufacturers. Company factory in 1994 at the time of the introduction of South Korea international industry co., advanced production equipment and testing equipment, battery for manufacturing high quality battery products laid a solid foundation, to more than 10 years, the company has always been to carry out production process standardization, systematic quality control staff and institutionalized management, product won the ministry of information industry network access of telecommunications equipment license; ETS test center products in Germany

Access of CE certification, 7 years by the electric power industry electrical equipment and instrumentation quality inspection ?

力源蓄電池應用范圍

• ⑴ 電話交換機；辦公自動化系統
• ⑵ 電器設備、醫療設備及儀器儀表；無線電通訊系統
• ⑶ 計算機不間斷電源UPS；應急照明EPS
• ⑷ 輸變電站、開關控制和事故照明； 便攜式電器及采礦系統
• ⑸ 消防、安全及報警監測；交通及航標信號燈
• ⑹ 通信用備用電源；發電廠、水電站直流電源
• ⑺ 變電站開關控制系統；鐵路用直流電源　
• ⑻ 太陽能、風能系統；移動機站

MF系列主要技術參數:

Power source battery performance characteristics:

Pieces in the gas phase silica and silica gel made of a variety of additives, the structure of three-dimensional porous mesh structure, can be in sulfuric acid adsorption gel, while gel the hairline cracks in the positive precipitation oxygen to reach negative established channels, so as to realize the establishment of the sealed reaction efficiency and make a battery fully sealed, no precipitation of overflow of electrolyte and acid fog, no pollution to the environment and equipment.

Gel battery electrolyte in gel state, no flow, no leakage, may be vertical or horizontal display.

Plate grid structure: very ears and design points of dislocation type, 2 v series is plate at the bottom of the bag with a plastic protective film, can raise the reliability of battery in the work, using lead calcium alloy, tin alloy negative plate high hydrogen evolution potential. ?

力源蓄電池性能特點：

◆ 以氣相二氧化硅和多種添加劑制成的硅凝膠，其結構為三維多孔網狀結構，可將硫酸吸附在凝膠中，同時凝膠中的毛細裂縫為正極析出的氧到達負極建立起通道，從而實現密封反應效率的建立，使電池全密封、無電解液的溢出和酸霧的析出，對環境和設備無污染。

◆ 膠體電池電解質呈凝膠狀態，不流動、無泄露，可立式或臥式擺放。

◆ 板柵結構：極耳中位及底角錯位式設計，2V系列正極板底部包有塑料保護膜，可提高蓄電池在工作中的可靠性，合金采用鉛鈣錫鋁合金，負極板析氫電位高。正板合金為高錫低鈣合金，其組織結構晶粒細小致密，耐腐蝕性能好，電池具有長使用壽命的特點。

◆ 隔板采用進口的膠體電池波紋式PVC隔板，其隔板孔率大，電阻低。

◆ 電池槽、蓋為ABS材料，并采用環氧樹脂封合，確保無泄露。

◆ 極柱采用純鉛材質，耐腐蝕性能好，極柱與電池蓋采用壓環結構即壓環與密封膠圈將電池極柱實現機械密封，再用樹脂封合劑粘合，確保了其密封可靠性。

◆ 2V、12V全系列電池均具備濾氣防爆片裝置，電池外部遇到明火無引爆，并將析出氣體進行過濾，使其對環境無污染。

◆ 膠體電池電解質為凝膠電解質，無酸液分層現象，使極板各部反應均勻，增強了大型電池容量及使用壽命的可靠性。

◆ 過量的電解質，膠體注入時為溶膠狀態，可充滿電池內所有的空間。電池在高溫及過充電的情況下，不易出現干涸現象，電池熱容量大，散熱性好，不易產生熱失控現象。

◆ 膠體電池凝膠電解質對正極、負極活物質結晶過程產生有益影響，使電池的深放電循環能力好，抗負極硫酸鹽化能力增強，使電池在過放電后恢復能力大幅提高。

◆ 電池使用溫度范圍廣(-30℃～50℃)，自放電極低